CSH-250130 CO2 Laser Cutting Machine

Click here

1. This model has been released and installed on customers' sites since more than 15 years ago. Those machines installed, continued to bring profits for both oversea and local users. Most of the earliest users are still using this machine stably and comfortably.
2. The working area of this model is 250 x 130 cm. It integrates the following designs and durable parts, having achieved reliable laser cutting work in heavy usage environments.
2.1 Equipped with RF Pulse CO2 (metal) laser head. According to the company's experience, it can be stable and durable for 5-10 years of operation. The options of CO2 laser tube are between 100W and 600 W.
2.2 By applying the gantry design, the difference between the farthest processing point (away from laser output) and the nearest processing point will be greatly reduced. Thus the cutting quality will be more consistent.
2.3 Driven by ball screw, the accuracy is high, and there is no need for additional gap compensation in the controller.
2.4 Driven by AC servo motor, it runs with sufficient power and is controlled by servo without losing steps.
3. To be addressed specifically, the shorter ball screw axes can be modified to a dedicated " Beam Delivery Same Distance (BDSD)” module (optional), which is required by die-board manufacturers for making “high quality cuts” on 18mm plywood.
4. The working platform of this machine is made of 15mm thick aluminum extrusion material, which has excellent flatness and can be disassembled and replaced. At the same time, this also avoids the problem of continuous partial cutting of the beam when the flatness is poor in a large working area.
5. The lower part of the machine adopts an open design, including two unloading chutes. Pipelines and snake pipes are arranged on the side of the machine, making maintenance easier.
6. The machine base support design includes six wheels, which are made of silent nylon material with a diameter of 100mm and a load capacity of up to 900kg.
7. The upper exhaust design of the machine provides a 4" extraction interface in the sheet metal. The lower exhaust air provides two 6" extraction ports in the sheet metal. Customers can install their own hoses and high-horsepower exhaust fans to improve the ventilation effect.
8. This machine can be equipped with a visual positioning CCD (optional item) to grab the "target-mark”- on the workpiece, which is suitable for all kinds of materials after printing.
9. Provided with this machine are both 2" and 5" focus length lenses, which are ideal for cutting thin and thick sheet material respectively. For getting the best quality cut in one pass, the thickness of the sheet should be under 30mm.

CSF-130090 CO2 Laser Cutting Machine

Click here

1. This machine are driven by several ball screw axes, which adopts a sealed and dustproof design to reduce the maintenance required.
The Y-axis includes two precision grade C5 grade screws: +/-40um/1000mm with a cumulative error (40 um).
The X-axis includes a rotation-grade C7 grade screw: +/-50um/300mm cumulative error (50 um).
2. It uses a 150W pulsed laser, and the actual output is about 150W-180W.
3. Adopt 2.5" & 5" focusing lens, easy to replace the focusing lens when changing the thick plate.
4. Use positive pressure blowing (the gas must be oil-free and waterless). It can effectively cool the lenses and extend the use of longevity lenses.
5. Cutting and processing capacity of 150W model:
5.1 1.2mm steel, stainless steel @ 1600-1800mm/min speed.
5.2 30mm Acrylic @120mm/min.
5.3 3mm acrylic @5000mm/min (max. speed).
5.4 18mm wood @500mm/min (200w is actually about 800-1000mm/min).
6. Upper and lower exhaust are standard equipment.
7. Steel structure will not deform, improving the flatness of the machine processing platform.
8. Z-axis adjustable 40mm, penetrating design, etc.
9. The whole set includes EZLASER CAD/CAM software, which can be set up with advanced functions such as "lead cut".
10. Multilingual 7" human-machine touch interface, very convenient to operator.
11. Visual Positioning CCD (Optional) main specifications / performance : 130 megapixels, resolution 11.3um, recognition range 14.5 mmx11.0 mm.

CSB-150100-S Fiber Laser Cutting Machine

Click here

1. Laser Source: (Made in Germany) IPG YLR-3000 series, wavelength: 1070nm, output power: 3000W.
2. X/Y axis travel: 1500 mm x 1000 mm.
3. Working Area: greater than 1500 mm x 1000 mm.
4. Machine Size: about 2500 mm (length) x 1600 mm (width).
5. Motion System: X/Y axis maximum cutting feed speed: 15M/min. Z-axis electric adjustment, automatically tracking the height of metal materials, Z-axis standard height 50mm.
6. Working Platform: special for cutting - needle support platform.
7. System Safety: The lighting road is fully enclosed for optimal safety. It has a door lock protection switch (laser protection when the door is open).
8. Build-in PRO-CAM software:
8.1 It can be operated remotely through remote computer monitoring and software, which is conducive to specific usage scenarios and obstacle removal.
8.2 Cutting parameters and required gas reference accessories, provide air, oxygen or nitrogen gas depending on the cutting material
9. Processing Capability for different metallic sheets :
Applicable thickness - carbon steel less than 16mm, stainless steel less than 10mm, aluminum less than 6mm, copper less than 4mm, brass less than 4mm.

CSB-060060-S Fiber Laser Cutting Machine

Click here

1. Size, Safety & Ability: Small size Class I safety protection. The 450W machine can cut 1mm Stainless Steel at speed higher than 4M/min.
2. Precise material height auto-focus head completely sealed beam and the assistance of coaxial gas protect lens from contaminants.
3. The laser machine works with PRO-CAM software for nesting, sorting of objects and setting laser processing parameters.
4. Sealed Ball-Screw Axes with excellent reliability to get high accuracy for size of objects together with good cutting edge.
5. Built-In PC-based controller, input devices (Keyboard, Mouse...) and software to complete necessary preparations for cutting processes.
6. Motorized Auto Focus Module initialized and calibrated by PC : Precisely electrical auto focus lens unit for fast and precise metal cutting.
7. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier.
8. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. Assist-gas pressure of O2 and N2 could be adjusted digitally for best cutting quality of thicker metallic sheet.

CLB-060060 Fiber Laser Cutting Machine

Click here

1. Built by Sealed Linear Motor Axes with excellent reliability to get high accuracy (1um) for size of objects together with good cutting edge.
2. Working with locally installed commercial PC of Windows OS and CAD (AutoCAD …) drawing software, operator will be easy to learn all software functions for being familiar with the user-interface of Windows.
3. This laser machine was sold together with the EZLASER CAD/CAM software for nesting, sorting of objects and setting laser processing parameters.
4. Size, Safety & Ability: Small size Class I safety protection. The 450W machine can cut 1mm Stainless Steel at speed higher than 4M/min.
5. Precise material height auto-focus head completely sealed beam and the assistance of coaxial gas protect lens from contaminants.
6. Motorized Auto Focus Module initialized and calibrated by PC : Precisely electrical auto focus lens unit for fast and precise metal cutting.
7. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier.
8. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. Assist-gas pressure of O2 and N2 could be adjusted digitally for best cutting quality of thicker metallic sheet.

ATCLB-025025 CO2 Laser Cutting / Scribing Machine

Click here

ATCLB-025025 CO2 Laser Drilling / Cutting / Scribing Machine for Technical Ceramic
(Pulse CO2 Laser Inside, Linear-Motor, Working Area: 025x025 cm)

Key features:
1. CO2/fiber laser or UV laser (depending on customer material and needs).
2. X/Y axis travel: Linear motor 250x250mm (inclusive) or bigger
3. X/Y axis squareness: +/- 20μm
4. Repeatability : +/- 2 μm
5. Straightness/flatness +- 20 μm
6. Movement Speed: 1~15000mm/min adjustable
7. Machining platform size: 250x250x70mm
8. X/Y axis motion control, linear/arc tween motion.
9. Computer color screen human-machine interface, convenient for setting the processing parameter.
10. Optional CCD positioning module for cutting etc.

This machine is an excellent choice for Cutting, Drilling and Scribing below technical ceramic substrate :
1. alumina
2. boron nitride
3. zirconia
4. aluminium nitride

PSB-060060 CO2 Laser Patterning Machine

Click here

1. Size, Safety & Ability: small size Class I safety protection.
2. Motorized Ball-Screw Axes with excellent accuracy actuates Z-axis movement for focusing.
3. Precision and fine marking lines width less than 1 mm.
4. Luxinar / Kern Pulse CO2 Laser Head Inside : Stable output power and extremely durable for heavy duty processing.
5. Utilizing multi-lingual MakingMate software for setting parameters, with familiar Windows functions and easy-to-learn for users. Be able to engrave objects deeply with drawing (circle, arc...),auto-text (S/N, 1D/2D barcode) and graphics (DXF,TIF,JPG...). Provide Grid Method and Scale Method for precise distortion compensation. Formula method provides barrel, trapezoid and parallelogram 3 kinds of distortion correction. Allow users to name, save, and load the marking parameters. It provides a user-friendly operation window for quick execution/input of commands such as signal input, signal output, pause, delay time, motion, current position setting, loop, home return, zoom, port output, port input, and power setting. Users are allowed to edit the parameters of this object: Digital In, Digital Out, Do Pause, Delay. User Level is divided into Operator, Programmer, and Administrator to separate user's authorities.
6. Optional advanced features of the software includes : Rotary Axis Positioning Marking, Mark On Fly, 2.5D/3D Marking, Dual Head Marking, Computer Vision Positioning Marking…
7. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier.
8. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. With the Pulse-Duration-Selectable feature, users can make different effects of marking on material. For example, users can make colored marks on surface of stainless steel with almost all colors...
10. Extended applacations include : Fine Cutting of Mylar / PET films...

CSE-250130 CO2 Laser Cutting Machine

Click here

1. ATCSE-200130 is based on the software and hardware configurations of ATCSH-250130, which has been released and installed on customers’ sites since more than 15 years ago and earns satisfactions from oversea and local users. To be addressed specifically, the shorter ball screw axes is modified to a dedicated " Beam Delivery Same Distance (BDSD)” module (optional), which is required by die-board manufacturers for making “high quality cuts” on 18mm plywood. Following are functions / features the same as the ATCSH-250130.
2. The working area of this model is 250 x 130 cm. It integrates the following designs and durable parts, having achieved reliable laser cutting work in heavy usage environments.
2.1 Equipped with RF Pulse CO2 (metal) laser head. According to the company's experience, it can be stable and durable for 5-10 years of operation. The options of CO2 laser tube are between 100W and 600 W.
2.2 By applying the gantry design, the difference between the farthest processing point (away from laser output) and the nearest processing point will be greatly reduced. Thus the cutting quality will be more consistent.
2.3 Driven by ball screw, the accuracy is high, and there is no need for additional gap compensation in the controller.
2.4 Driven by AC servo motor, it runs with sufficient power and is controlled by servo without losing steps.
3. The working platform of this machine is made of 15mm thick aluminum extrusion material, which has excellent flatness and can be disassembled and replaced. At the same time, this also avoids the problem of continuous partial cutting of the beam when the flatness is poor in a large working area.
4. The lower part of the machine adopts an open design, including two unloading chutes. Pipelines and snake pipes are arranged on the side of the machine, making maintenance easier.
5. The machine base support design includes six wheels, which are made of silent nylon material with a diameter of 100mm and a load capacity of up to 900kg.
6. The upper exhaust design of the machine provides a 4" extraction interface in the sheet metal. The lower exhaust air provides two 6" extraction ports in the sheet metal. Customers can install their own hoses and high-horsepower exhaust fans to improve the ventilation effect.
7. This machine can be equipped with a visual positioning CCD (optional item) to grab the "target-mark”- on the workpiece, which is suitable for all kinds of materials after printing.
8. Provided with this machine are both 2" and 5" focus length lenses, which are ideal for cutting thin and thick sheet material respectively. For getting the best quality cut in one pass, the thickness of the sheet should be under 30mm.

CSB-060060 CO2 Laser Cutting Machine – Wood Die-Board and Plastic (PVC) Die-Board

Click here

CSB-060060 CO2 Laser Cutting Machine – Wood Die-Board and Plastic (PVC) Die-Board

1. This CSB-060060 laser machine adopts a [Beam Fixed] / Moving Table configuration, making it the preferred model for cutting small-size Die-Board.
In addition to the production of 18mm plywood Die-Board, this machine will also work well for making the plastic Die-Board (typically 6mm PVC base plates) commonly used for stamping membrane films, separating films, and other thin material parts traditionally cut by a die in the electronics industry. This machine would be a very helpful tool for cutting these die-boards of small volume or even one-of-a-kind.
2. CSB-060060 cutting table is driven by ball screw shaft. The ball screw shaft is sealed and dustproof, which will reduce the needs for maintenance.
3. The worktable (Needle Pins Table) is designed to be installed with copper pins, and the copper thimble platform can minimize the damage to the bottom of the material plate caused by the reflected laser light.
4. The whole series of this machine is equipped with pulsed CO2 lasers imported from Europe and the United States. The entry-level model would be named a 150W machine. However, the actual output power of laser in that machine could reach up to 150W-180W.
5. This machine applied 2.5" & 5.0" focusing lens, when the thin plate is changed to cut the thick plate, it is easy to replace the focusing lens. The Z-axis stroke is 65 mm. Besides, with the assistance of built-in "Auto Focus Tracer", accurate focusing of laser beam could be done automatically prior to cut.
6. This machine will need to be supplied with oil-free and water-less assistant air. That will help cool the lenses and extend their lifetime.
7. We make all upper and lower side parts for exhaust ventilation standard modules in this machine.
8. The welded structure of the machine will rarely bend to become deformed, which will keep the flatness of platform during long years of usage.
9. The whole set of machines includes EZLASER CAM software. Some important CAM features such as "lead cut" are included in this software.
10.This machine is equipped with a multilingual 7" touch screen interface, which is very convenient for the operator.

PSB-060060 Fiber Laser Patterning Machine

Click here

1. Size, Safety & Ability: small size Class I safety protection.
2. Motorized Ball-Screw Axes with excellent accuracy actuates Z-axis movement for focusing.
3. Precision and fine marking lines width less than 0.1mm.
4. IPG Pulse Fiber Laser Inside : Stable output power and extremely durable for heavy duty processing.
5. Utilizing multi-lingual MakingMate software for setting parameters, with familiar Windows functions and easy-to-learn for users. Be able to engrave objects deeply with drawing (circle, arc...),auto-text (S/N, 1D/2D barcode) and graphics (DXF,TIF,JPG...). Provide Grid Method and Scale Method for precise distortion compensation. Formula method provides barrel, trapezoid and parallelogram 3 kinds of distortion correction. Allow users to name, save, and load the marking parameters. It provides a user-friendly operation window for quick execution/input of commands such as signal input, signal output, pause, delay time, motion, current position setting, loop, home return, zoom, port output, port input, and power setting. Users are allowed to edit the parameters of this object: Digital In, Digital Out, Do Pause, Delay. User Level is divided into Operator, Programmer, and Administrator to separate user's authorities.
6. Optional advanced features of the software includes : Rotary Axis Positioning Marking, Mark On Fly, 2.5D/3D Marking, Dual Head Marking, Computer Vision Positioning Marking…
7. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier.
8. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. With the Pulse-Duration-Selectable feature, users can make different effects of marking on material. For example, users can make colored marks on surface of stainless steel with almost all colors...
10. Extended applacations include : Laser Cleaning and Structuring for Molded Parts, Pipe, Battery of EV...

MSB-020010 Fiber Laser Marking Machine

Click here

1. It is equipped with X-Y Stage constructed by high prevision ball-screw axis with strokes 200 x100 mm. That will extend the available marking area from field size (depending on f-theta lens applied ) of ex: 70mmX70mm to a larger 200 X 100 mm area with controllable position for processing spots. X-Y Stage with other strokes and different power levels of fiber laser will be negotiable to select.
2. This machine complied with US CDRH Class I safety regulation. The material of viewing windows is qualified and from the US top brand company LaserVision。
3. IPG Pulse Fiber Laser Inside : Stable output power and extremely durable for heavy duty processing.
4. Utilizing multi-lingual EZLASER CAD/CAM (Marker) (or MakingMate) software for setting parameters, with familiar Windows functions and easy-to-learn for users. Be able to engrave objects deeply with drawing (circle, arc...),auto-text (S/N, 1D/2D barcode) and graphics (DXF,TIF,JPG...). Provide Grid Method and Scale Method for precise distortion compensation. Formula method provides barrel, trapezoid and parallelogram 3 kinds of distortion correction. Allow users to name, save, and load the marking parameters. It provides a user-friendly operation window for quick execution/input of commands such as signal input, signal output, pause, delay time, motion, current position setting, loop, home return, zoom, port output, port input, and power setting. Users are allowed to edit the parameters of this object: Digital In, Digital Out, Do Pause, Delay. User Level is divided into Operator, Programmer, and Administrator to separate user's authorities. Besides, the software provides library and OCX component for developing advanced “Marking Total Solutions”. It also supports variety PCI, PCIe, USB, EtherNet interfaces for controllers and features of marking on plane or non-plane surface are both available.
5. Optional advanced features of the software includes : Rotary Axis Positioning Marking, Mark On Fly, 2.5D/3D Marking, Dual Head Marking, Computer Vision Positioning Marking…
6. Motorized Ball-Screw Axes with excellent accuracy actuates Z-axis movement for focusing.
7. Precision and fine marking lines width less than 0.1mm.
8. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. With the Pulse-Duration-Selectable feature, users can make different effects of marking on material. For example, users can make colored marks on surface of stainless steel with almost all colors...
10. Typical applications of this ,machine will include :
10.1 Automobile Industry (casting, molded part, ball-bearing...)
10.2 Metallic Tools (drill, joint head...)
10.3 Medical Devices (stainless steel, titanium alloy...)
10.4 ID and Security Card (smart card, bank card, badge...)
10.5 Electronic Parts (IC, pc board, keyboard...)
10.6 Jewelry and Watches (for marking logo, brand name...)
10.7 Day and Night Components (panel, switch, indicator...)
10.8 Rapid Cutting / Drilling of Metal Foils
10.9 Selective Removal of Coating or thin Film on substrate

MNB-000000 Fiber Laser Marking Machine

Click here

1. This machine complied with US CDRH Class I safety regulation. The material of viewing windows is qualified and from the US top brand company LaserVision。
2. IPG Pulse Fiber Laser Inside : Stable output power and extremely durable for heavy duty processing.
3. Utilizing multi-lingual EZLASER CAD/CAM (Marker) (or MakingMate) software for setting parameters, with familiar Windows functions and easy-to-learn for users. Be able to engrave objects deeply with drawing (circle, arc...),auto-text (S/N, 1D/2D barcode) and graphics (DXF,TIF,JPG...). Provide Grid Method and Scale Method for precise distortion compensation. Formula method provides barrel, trapezoid and parallelogram 3 kinds of distortion correction. Allow users to name, save, and load the marking parameters. It provides a user-friendly operation window for quick execution/input of commands such as signal input, signal output, pause, delay time, motion, current position setting, loop, home return, zoom, port output, port input, and power setting. Users are allowed to edit the parameters of this object: Digital In, Digital Out, Do Pause, Delay. User Level is divided into Operator, Programmer, and Administrator to separate user's authorities. Besides, the software provides library and OCX component for developing advanced “Marking Total Solutions”. It also supports variety PCI, PCIe, USB, EtherNet interfaces for controllers and features of marking on plane or non-plane surface are both available.
4. Optional advanced features of the software includes : Rotary Axis Positioning Marking, Mark On Fly, 2.5D/3D Marking, Dual Head Marking, Computer Vision Positioning Marking…
5. Motorized Ball-Screw Axes with excellent accuracy actuates Z-axis movement for focusing.
6. Precision and fine marking lines width less than 0.1mm.
7. Easy Maintenance Design : Easy open side covers and modular design make maintenance faster and easier.
8. Minimum Machine Frame Design : Compact frame design minimizes the machine footprint.
9. With the Pulse-Duration-Selectable feature, users can make different effects of marking on material. For example, users can make colored marks on surface of stainless steel with almost all colors...
10. Typical applications of this ,machine will include :
10.1 Automobile Industry (casting, molded part, ball-bearing...)
10.2 Metallic Tools (drill, joint head...)
10.3 Medical Devices (stainless steel, titanium alloy...)
10.4 ID and Security Card (smart card, bank card, badge...)
10.5 Electronic Parts (IC, pc board, keyboard...)
10.6 Jewelry and Watches (for marking logo, brand name...)
10.7 Day and Night Components (panel, switch, indicator...)
10.8 Rapid Cutting / Drilling of Metal Foils
10.9 Selective Removal of Coating or thin Film on substrate

ATEBF-090060 CO2 Laser Engraving Machine

Click here

1. This machine is capable of an industrial-grade productivity (engraving speed 900 mm/sec and cutting speed 450 mm/sec), which are much faster than DIY grade equipment. Excellent engraving and cutting quality are also better than similar models using DC-excited glass laser tubes. The laser output power is under the control of high-speed PWM signals. Therefore, both the capabilities of slope engraving and kiss-cutting also surpass those machines utilizing DC-excited glass CO2 laser tubes.
2. For meeting the needs of diverse laser processing functions, this 900X600mm working area CO2 laser engraving (and cutting) machine system is a great choice on a low budget.
3. This entry-level, larger-sized CO2 laser engraving system is compact and easy to maintain. Especially suitable for advertisers, signage manufacturers, and individuals who need to handle a variety of materials including acrylic, wood, MDF, vinyl signage, cardboard, and paper. It is ideal for making gift and award items and various decorations with a sense of exquisite art in batches.
4. People will also find that the machine's workspace is perfect for creating MASK with the desired patterns, so that printing or etching can be completed subsequently.

ATEBF-040030 CO2 Laser Engraving Machine

Click here

This machine is the most affordable one among the entry-level models, suitable for small creative studios and entrepreneurs to choose from.
1. The working area of this machine is 400 mm x 300 mm. It is capable of an industrial-grade productivity (engraving speed 900 mm/sec and cutting speed 450 mm/sec), which are much faster than DIY grade equipment. Excellent engraving and cutting quality are also better than similar models using DC-excited glass laser tubes. The laser output power is under the control of high-speed PWM signals. Therefore, both the capabilities of slope engraving and kiss-cutting also surpass those machines utilizing DC-excited glass CO2 laser tubes.
2. It can engrave and cut acrylic, wood, rubber, paper, and various other materials.
3. The operation panel previews stored graphics file and dynamically displays processing trajectories and coordinates.
4. The processing parameters (such as speed and power) can be modified on the operation panel and automatically saved for future use.
5. The control system will allow us to forecast and preview working time in millisecond scale.
6. The built-in red laser pointer helps users locate the laser beam cutting position instantly.
7. The honeycomb table will support soft materials such as textiles, films, and cardboard properly.
8. The laser is equipped with air-cooling fan. Additional chiller for cooling is not required.

LLC-General (1)

LLC general introductions

CCD way of positioning in LLC laser systems

Demo the way to cut printed (silk-screened...) material as CCD (Option) is equipped in LLC system.

CBF - Cutting Printed Sticker with CCD Positioning

CBF series cut printed (silk-screened...) material as CCD (Option) is equipped.

CLB-150F Cutting 1mm Stainless Steel

CLB-150F-060060 Cutting 1mm Stainless Steel @ 700 mm/mins.

CSB-150F Cutting 0.5mm Aluminum

Cover of a designed Golfer Name Badge

CSH-210P Cutting 25mm Acrylic (PMMA)

Power=90%
Speed=200 mm/min
Time=89 secs

CSH-210P Cutting 15mm Acrylic (PMMA)

Power=90%
Speed=550 mm/min
Time=35 secs

CSE-300P Cutting 18mm H(M)DF / Plywood

Cutting 18mm H(M)DF for furniture industry.
Cutting 18mm Plywood (as Die Board).

CSH-210P Cutting 8mm Acrylic (PMMA)

Power=90%
Speed=1500 mm/min
Time=16 secs

CSH-200R Cutting 20mm Acrylic (PMMA)

ATEBF-090060-30R Engrave and Cut 3.7mm Acrylic

ATEBF-090060-30R Engrave and Cut 100x26mm Acrylic 3.7mm in 1min39sec

ATEBF-090060-30R Engrave a photo on black paper

ATEBF-090060-30R Engrave 120x90mm Photo in 4min15sec

MNB-20F marking on a cylindrical part

MNB-20F marking image on back acrylic

PSB-QUICK Patterning (Cutting / Marking....) on cardboard

Also applicable to material such as PET, Textile, and Non-woven....

PSB-Patterning / cutting on paper

PSB-QUICK Patterning on 1mm Acrylic

PSB-100P - It takes about 60 secs / pc. Also applicable to PET, Textile, Non-woven....

SLB-150P Scribing and Cutting 1.0mm (fine) Ceramic