Hot News公告訊息#1803: 鼎信光電各類型雷射光路設計 (CO2 Laser / Fiber Laser)

#1803: 鼎信光電各類型雷射光路設計 (CO2 Laser / Fiber Laser)

In order to get most efficient and best quality Laser Beam from the CO2/Fiber lasers we equipped,our engineers design the systems with different mechnisms as shown below:


1. F (Flying-Optics) design :
    <"F" is shown in the 5th code of LLC product.>





2.B (Beam-Fixed) design :
   <"B" is shown in the 5th code of LLC product.>


   2.1 B-1 design:



     In this configuration, the laser and beam delivery system are fix-mounted in a stationary position.


  2.2 B-2 design: 
  


    This design uses a computer controlled scanning head to deliver the laser beam to the target material. Galvanometer driven mirrors inside the scanning head steer the beam along 2 - 3 axes enabling coverage across an imaging area, referred to as the field. The size of the field is determined by a number of factors including the scanning head lens configuration, working distance between the scanning head and target material, and if using a 2-axis or 3-axis scanning head. 


3. H (Half Flying-Optics) design :
    <"H" is shown in the 5th code of LLC product.>




For Example : 

Example 1 : LLC product code AMCSH-400R-250130 represents it's a RF 400W CO2 laser Cutting system of 250x130cm working area, and with Ball-Screws inside and H design for beam path.

Example 2 : LLC product code AMCSH-300P-250130 represents it's a Pulse 300W CO2 laser Cutting system of 250x130cm working area, and with Ball-Screws inside and H design for beam path.
          
Example 3 : LLC product code AMCBF-100R-130090 represents it's a RF 100W CO2 laser Cutting system of 130x090cm working area, and with Time-Belt inside and F design for beam path.

Example 4 : LLC product code AMMNB-200F-000000 represents it's a 20W Fiber laser Marking system with No X-Y stage coould be equipped and B design for beam path.
                  
       While AMMSB-20F-030030 represents it's a 20W Fiber laser Marking system with a Ball-Screws based X-Y stage of 030x030 cm stroke for both directions, and B design for beam path. (For system of this kind, the working area of single process is determined by f-theta lens choosen)  

Example 5 : LLC product code AMPLB-20F-060060 represents it's a 20W Fiber laser Patterning system with a 060x060cm size extended working area made by X-Y table,  driven by Linear-Motor and with B design for beam path.