It has been one year since we completed the relocation. The facilities are ready for QUANTITY orders in this busy season!!!
#1803: LLCのCO2レーザー/ファイバーレーザーのビーム経路の設計4
レーザーライフカンパニー 300 新竹科學工業園區新竹市東區工業東四路24號1F
近くの1階にある工場に移転しました...We relocated to a factory in ground floor nearby...The related operations need to be changed starting from March 18th,2020.  Thanks for your attention. Our NEW Place (details shown below and in bottom area of web-page) : Approaching the NEW Place  TEL: +886-3-6027412  FAX: +886-3-5641419  1F., No. 24, Gongye E. 4th Rd., Science-Based Industrial Park, Hsinchu 300, TAIWAN 2020年3月18日 起, 所有物品寄送及聯繫, 請轉移至本公司新址 (距離原處1公里)。地址: 300 新竹科學工業園區工業東四路24號1FTEL: 03-6027412(鼎信 新設之代表號)       *** 舊分機號須在前面加 5, 成為共 4碼 ***FAX: 03-5641419(不變動) #2002: 近くの1階にある工場に移転しました... 2021-05-03 2022-05-03
レーザーライフカンパニー 300 新竹科學工業園區新竹市東區工業東四路24號1F
レーザーライフカンパニー 300 新竹科學工業園區新竹市東區工業東四路24號1F
2021-05-03 $NT 0
Worldwide (Tech Capable) Resellers Wanted !

In order to get most efficient and best quality Laser Beam from the CO2/Fiber lasers we equipped,our engineers design the systems with different mechnisms as shown below:

1. F (Flying-Optics) design :
    <"F" is shown in the 5th code of LLC product.>


2.B (Beam-Fixed) design :
   <"B" is shown in the 5th code of LLC product.>

   2.1 B-1 design:


     In this configuration, the laser and beam delivery system are fix-mounted in a stationary position.

  2.2 B-2 design: 

    This design uses a computer controlled scanning head to deliver the laser beam to the target material. Galvanometer driven mirrors inside the scanning head steer the beam along 2 - 3 axes enabling coverage across an imaging area, referred to as the field. The size of the field is determined by a number of factors including the scanning head lens configuration, working distance between the scanning head and target material, and if using a 2-axis or 3-axis scanning head. 

3. H (Half Flying-Optics) design :
    <"H" is shown in the 5th code of LLC product.>


For Example : 

Example 1 : LLC product code AMCSH-400R-250130 represents it's a RF 400W CO2 laser Cutting system of 250x130cm working area, and with Ball-Screws inside and H design for beam path.

Example 2 : LLC product code AMCSH-300P-250130 represents it's a Pulse 300W CO2 laser Cutting system of 250x130cm working area, and with Ball-Screws inside and H design for beam path.
Example 3 : LLC product code AMCBF-100R-130090 represents it's a RF 100W CO2 laser Cutting system of 130x090cm working area, and with Time-Belt inside and F design for beam path.

Example 4 : LLC product code AMMNB-200F-000000 represents it's a 20W Fiber laser Marking system with No X-Y stage coould be equipped and B design for beam path.
       While AMMSB-20F-030030 represents it's a 20W Fiber laser Marking system with a Ball-Screws based X-Y stage of 030x030 cm stroke for both directions, and B design for beam path. (For system of this kind, the working area of single process is determined by f-theta lens choosen)  

Example 5 : LLC product code AMPLB-20F-060060 represents it's a 20W Fiber laser Patterning system with a 060x060cm size extended working area made by X-Y table,  driven by Linear-Motor and with B design for beam path.

前のページ リストへ 次のページ